Electro Industries Shark 200T Especificações descarregar pdf (Página 295)

Doc# E149701 E - 27

E: Using the IEC61850 Network Card

Electro Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

Electro Industries/GaugeTech

The Leader In Power Monitoring and Smart Grid Solutions

NOTE: As a result of the reset, the communication link with the card will be lost

and must be re-established.

E.5: Resetting the IEC 61850 Protocol Ethernet Network Card

If you need to reset the IEC 61850 Protocol Ethernet Network card, you can either do

a hardware reset (see Section 8.4) or use the Reset Network Card webpage.

1. Click Reset Network Card from the left side of the webpage.

2. You will see a screen similar to the one shown above. Enter the Reset Password:

the default is adminR35et for firmware runtime version 3.35 or later; and

r2d2andc3po for earlier firmware runtime versions. See the note on page A-21.

3. Click the Reset button. The Network card will reset.

NOTE: As a result of the reset, the communication link with the card will be lost

and must be re-established.

1 2 ... 290 291 292 293 294 295 296 297 298

Sem comentários

Electro Industries Shark 200T Especificações Página 295