Electro Industries SM1-16 Manual do Utilizador descarregar pdf (Página 19)

Electro Industries/GaugeTech

Doc # E113-7-07 V1.04 1-11

1.6:

Connecting

the

Substation

Multiplexor

Directly

Computer

1. Use an RS232 cable to connect the Substation Multiplexor’s Master Port to an available RS232 port

on the computer.

2. Set the 232(DCE)Network switch beneath the Master Port to 232(DCE).

3. The Master Port is factory-set to operate at 57600 baud. To configure and communicate with the

Substation Multiplexor, run a standard terminal program on the computer, such as Windows

HyperTerminal. See Chapter 3 for details.

1.7:

Connecting

the

Substation

Multiplexor

Using

the

Ethernet.

1. Connect an RJ-45 cable to the Substation Multiplexor’s RJ-45 jack.

2. Set the 232(DCE) Network switch beneath the Master Port to Network.

3. Use a standard terminal program on the computer, such as Windows

HyperTerminal, to connect to

the Substation Multiplexor and configure it. See Chapter 3 for details.

4. The Ethernet Port is factory-set to operate at 57600 baud. You should keep the port set to 57600 after

you have connected.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Sem comentários

Electro Industries SM1-16 Manual do Utilizador Página 19